An automated system for pH measurements at AVR
Efficient measurement with Liquiline CDC90
AVR Waste in Botlek, Rotterdam, processes up to 1.7 million tons of residual waste per year. The waste is converted into raw materials and energy using a wide range of processes, which involve a lot of monitoring and regulation.
Richard Kooijmans and Hadji Cifci from AVR
Waste treatment plant in Botlek, Rotterdam
Results
-
Strong reduction of maintenance effort with improved work safety
-
Optimizing the yield and quality of the process
-
Ability to control measurement points remotely via any process control system or mobile device
We had to replace a sensor every two days, now it’s only once every eight months. So, we save a lot of man hours. The quality of the water treatment has improved too, which is an unbelievably big win.
AVR Waste
The challenge
Kooijmans says “With our processes –particularly water treatment – you get lots of scaling, a big build-up of scale that causes the sensors to get stuck in the fixtures. In practice, 99% of our consumption is purely due to (sensors) breakages when changing . They break off or fall while being handled. Some 18,000 man hours are involved in total!”
Savings for the company
To bring down the consumption of pH sensors and automate the process of calibration and cleaning, a fully automated system, the Liquiline Control CDC90, was installed.Kooijmans says “Now, alternating pH sensors are cleaned every four hours. Before, we had to replace a sensor every two days, now it’s only once every eight months. So, we save a lot of man hours and are saved from what is just a messy job. The quality of the water treatment has improved too, which is an unbelievably big win.”
Предложения по теме
-
Стандартные продукты
- Надежность, прочность и неприхотливость
Технический уровень
Простота
-
Высокотехнологичные продукты
- Функциональность и удобство
Технический уровень
Простота
-
Специализированные продукты
- Для требовательных областей применения
Технический уровень
Простота
Вариативность
| Выбор категории FLEX | Технический уровень | Простота |
|---|---|---|
Выбор варианта Fundamental Выполнение основных измерительных задач |
Технический уровень
|
Простота
|
Выбор варианта Lean Простое управление основными процессами |
Технический уровень
|
Простота
|
Выбор варианта Extended Оптимизация процессов с помощью инновационных технологий |
Технический уровень
|
Простота
|
Выбор варианта Xpert Управление самыми сложными областями применения |
Технический уровень
|
Простота
Вариативность |